PCB-Wash is designed for thorough cleaning of reflowed no-clean and rosin flux residues. PCB-Wash is designed to remove all flux residues while leaving the solder joints bright and shinny.  PCB-Wash is exceptionally economical.  PCB-Wash sells for half of other defluxing chemicals and is typically used at half of the concentration of other chemicals. 

Operation:
PCB-Wash is a concentrated cleaning solvent designed for use in aqueous batch or in-line spray machines. PCB-Wash is used to remove rosin-based flux, no-clean flux residues, lead-free flux, tacky flux, and assembly residues from surface mount and through hole printed wire assemblies. PCB-Wash is intended for use at concentrations ranging from 5 to 10%. In spray applications PCB-Wash should be heated to 150 F to ensure complete activation. The wash bath may be easily monitored and controlled using a drop titration kit (available from Aqueous Technologies). 

Storage and Handling:
All ingredients used in PCB-Wash are TSCA listed. None of the ingredients are regulated under SARA Section 313 or 40 CFR 372. PCB-Wash is not classified as a flammable liquid by DOT/NFPA. Refer to the Material Safety Data Sheet for specific handling precautions and instructions.

Product Availability:
PCB-Wash is available commercially in 5 gallon and 55 gallon drums.